Setting memory function

Setting memory function - Automatic drive positioner - Pre-driving checks and adjustments - Infiniti QX Owners Manual - Infiniti QX

The status of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key.

► Air conditioner system
► Navigation system
► Audio system

To use the memory function, lock the doors with the Intelligent Key that is linked to the settings. To enable the memorized settings: 1. Carry the Intelligent Key that is linked to the settings, and unlock the doors by pushing the driver’s door handle request switch or “UNLOCK” button on the Intelligent Key. 2. Push the ignition switch to the “ON” position. “Connection with the key has been done” will be displayed on the screen and the memorized settings are available (only when a new Intelligent Key is used).

    See also:

    How to handle the sensor
    The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper. To keep the Preview Function operating properly, be sure to observe the following: ...

    Warning light and display
    WARNING light and display Condition A: The chime sounds and the Intelligent Cruise Control system is canceled automatically in the conditions described below. Part of the system display will com ...

    Maximum load limits
    Maximum trailer loads Never allow the total trailer load to exceed the value specified in the “Towing load/ specification” later in this section. The total trailer load equals trailer weight pl ...