How to use brightness control and display ON/OFF button
HOW TO USE BRIGHTNESS CONTROL
AND DISPLAY ON/OFF BUTTON
Push the 
button to switch the
display brightness to the daytime mode or
the nighttime mode, and to adjust the
display brightness using the INFINITI controller
while the indicator is displayed at
the bottom of the screen.
Push and hold the 
button for
more than 2 seconds to turn the display
off. Push the button again to turn the
display on.
See also:
Additional information
• The TPMS does not monitor the tire pressure of the spare tire.
• The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden d ...
Draining of coolant water
If the vehicle is to be left outside without
antifreeze, drain the cooling system, including
the engine block. Refill before
operating the vehicle. For details, see
“Engine cooling system” in ...
Air cleaner
Air cleaner
Remove the retainers 1 as illustrated and pull out the filter element 2 .
The filter element should not be cleaned and reused. Replace it according to the maintenance intervals. See “I ...