Camera aiding corner sonar function
When the corner of the vehicle moves closer to the object while the Around View Monitor is displayed, an indicator is displayed and a tone is sounded by the corner sonar function to warn the driver. The color of the corner sonar indicator and the pattern of the tone vary according to the distance to the object. When the object is detected, the indicator (green) appears and blinks and the tone sounds intermittently. When the vehicle moves closer to the object, the color of the indicator turns yellow and the rate of the blinking and the volume of the tone increase. When the corner of the vehicle is very close to the object, the indicator stops blinking and turns red, and the tone sounds continuously. Keep the corner sonars (located on the front and rear bumper fascia) free from snow, ice and large accumulations of dirt. Do not clean the sonars with sharp objects. If the sonars are covered, the accuracy of the corner sonar function will be diminished.
WARNING
► The corner sonar function is not designed
to prevent the object.
► The colors of the corner sonar indicator
and the distance guide lines in the front/
rearview indicate different distances to
the object.
► Inclement weather may affect the function
of the corner sonar system; this
may include reduced performance or a
false activation.
► This function is designed as an aid to
the driver in detecting large stationary
objects to help avoid damaging the
vehicle. The system will not detect small
objects below the bumper, and may not
detect objects close to the bumper or on
the ground.
► If your vehicle sustains damage to the
bumper fascia, leaving it misaligned or
bent, the sensing zone may be altered
causing inaccurate measurement of obstacles
or false alarms.
CAUTION
Keep the interior of the vehicle as quiet as
possible to hear the tone clearly.
See also:
Roadside assistance program
In the event of a roadside emergency,
Roadside Assistance Service is available to
you. Please refer to your Warranty Information
Booklet (U.S.) or Warranty & Roadside
Assistance Informatio ...
Predictive course line settings
To turn ON or OFF the predictive course line display, push the SETTING button, select the “Camera” key and push the ENTER button.
• Predictive Course Lines
When this item is turned to ON, the pred ...
Available views
WARNING
● The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor may be differ ...