Automatic climate control

WARNING
► The air conditioner cooling function
operates only when the engine is running.
► Do not leave children or adults who
would normally require the support of
others alone in your vehicle. Pets should
not be left alone either. On hot, sunny
days, temperatures in a closed vehicle
could quickly become high enough to
cause severe or possibly fatal injuries to
people or animals.
► Do not use the recirculation mode for
long periods as it may cause the interior
air to become stale and the windows to
fog up.
► Do not adjust the heating and air
conditioning controls while driving so
that full attention may be given to
vehicle operation.
Start the engine and operate the automatic climate control system.

When the STATUS button is pushed, the automatic climate control status screen will appear. (See “How to use STATUS button” earlier in this section.)

1. “AUTO” automatic climate control ON
button/Temperature control dial (driver
side)
2. “
” front defroster button
3. “
” rear window defroster button
(See “Rear window and outside mirror
defroster/windshield deicer switch” in
the “2. Instruments and controls”
section.)
4. “
” fan speed decrease button
5. “OFF” button for climate control system
6. “
” fan speed increase button
7. “
” intake air control button
8. “
” air recirculation button
9. “DUAL” zone control ON/OFF button/
Temperature control dial (passenger
side)
10. “MODE” manual air flow control button
11. “REAR” control button
12. “A/C” air conditioner ON/OFF button
13. “
” upper vent button
14. “
” auto-recirculation button
See also:
Manual operation
Fan speed control:
Push the fan speed increase “” or decrease “” buttons to manually
control the fan speed.
Push the “AUTO” button to return to automatic control of the fan speed.
Air recirculati ...
Steering wheel switch for audio control
1. Menu control switch/ENTER button
2. Back switch
3. Volume control switch
4. Power on and SOURCE select switch
The audio system can be operated using the controls on the steering wheel.
...
Starting the engine
1. Apply the parking brake.
2. Move the selector lever to the P (Park)
or N (Neutral) position. (P is recommended.).
The starter is designed not to operate
unless the selector lever is in eith ...
