INFINITI Voice Recognition Alternate Command Mode

INFINITI Voice Recognition Alternate Command Mode  - INFINITI Voice Recognition system - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owners Manual - Infiniti QX

The following section is applicable when Alternate Command Mode is activated. When Alternate Command Mode is activated, an expanded list of commands can be used after pushing the TALK switch. switch. In this mode, available commands are not fully shown on the display or prompted. Review the expanded command list when this mode is active. See examples of Alternate Command Mode screens. Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. To improve the recognition success rate, try using the Speaker Adaptation Function available in that mode. (See “Speaker adaptation function (for Alternate Command Mode)” later in this section.) Otherwise it is recommended that Alternate Command Mode be turned OFF and Standard Mode be used for the best recognition performance.

Activating Alternate Command Mode

When the Standard Mode is active, perform

When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instrument panel. 2. Highlight the “Others” key. 3. Highlight the “Voice Recognition” key.

4. Highlight the “Alternate Command

4. Highlight the “Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Push the “OK” key to activate the Alternate Command Mode.

Displaying command list

If you are controlling the system by voice commands for the first time or do not know the appropriate voice command, perform the following procedure for displaying the voice command list (available only in Alternate Command Mode).

1. Push the INFO button on the instrument

1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Command List” key.

5. Select a category from the list.

5. Select a category from the list.

6. Select an item.

6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Push the BACK button to return to the previous screen.

Command list

Displaying user guide

Displaying user guide

You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the INFINITI controller and push the ENTER button. 3. Highlight the “Voice Recognition” key using the INFINITI controller and push the ENTER button. 4. Highlight the “User Guide” key using the INFINITI controller and push the ENTER button. 5. Highlight an item using the INFINITI controller and push the ENTER button.

Available items:

Getting Started

Describe the basics of how to operate the INFINITI Voice Recognition system.

Let’s Practice

Mode that allows practicing by following the instructions of the system voice.

Using the Address Book

Refer to Navigation System Owner’s Manual.

Finding a Street Address (if so equipped)

Refer to Navigation System Owner’s Manual.

Placing Calls

Tutorial for making a phone call by voice command operation.

Help on Speaking

Displays useful tips for how to correctly speak commands in order for them to be properly recognized by the system.

Voice Recognition Settings

Describes the available voice recognition settings.

Adapting the System to Your Voice

Tutorial adapting the system to your voice.

    See also:

    Engine compartment check locations
    VQ35DE engine 1. Power steering fluid reservoir (P. 8-12) 2. Engine coolant reservoir (P. 8-7) 3. Drive belt location (P. 8-16) 4. Fuse box (P. 8-21 ) 5. Engine oil filler cap (P. 8-9) ...

    Emergency engine shut off
    To shut off the engine in an emergency situation while driving, perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or – ...

    Warning systems switch (if so equipped)
    The warning systems switch is used to turn on and off the warning systems (Forward Collision Warning (FCW), Lane Departure Warning (LDW) and Blind SpotWarning (BSW) systems) that are activated using ...