Precautions on cruise control
► If the cruise control system malfunctions,
it will cancel automatically. The
CRUISE indicator light on the meter
panel will then blink to warn the driver.
► If the engine coolant temperature becomes
excessively high, the cruise
control system will be canceled automatically.
► If the CRUISE indicator light blinks, turn
the cruise control main switch off and
have the system checked by your
INFINITI retailer.
► The CRUISE indicator light may sometimes
blink when the cruise control
main switch is turned ON while pushing
the RESUME/ACCELERATE, SET/COAST
or CANCEL switch. To properly set the
cruise control system, perform the
steps below in the order indicated.
WARNING
Do not use the cruise control when driving
under the following conditions:
► when it is not possible to keep the
vehicle at a set speed
► in heavy traffic or in traffic that varies in
speed
► on winding or hilly roads
► on slippery roads (rain, snow, ice, etc.).
► in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
1. RESUME/ACCELERATE switch
2. SET/COAST switch
3. CANCEL switch
4. Cruise control MAIN switch
See also:
Avoiding collision and rollover
WARNING
Failure to operate this vehicle in a safe and
prudent manner may result in loss of control
or an accident.
Be alert and drive defensively at all times.
Obey all traffic regulations. ...
Operating range
The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range.
When the Intelligent Key battery is almost discharged or strong radio waves are pr ...
Push-button ignition switch
WARNING
Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition s ...