Cruise control operations
The cruise control allows driving at a speed
between 25 to 90 MPH (40 to 144 km/h)
without keeping your foot on the accelerator
pedal.
To turn on the cruise control, push the
MAIN switch on. The CRUISE indicator will
come on.
To set cruising speed, accelerate your
vehicle to the desired speed, push the
SET/COAST switch and release it. Take your
foot off the accelerator pedal. Your vehicle
will maintain the set speed.
► To pass another vehicle, depress the
accelerator pedal. When you release
the pedal, the vehicle will return to the
previously set speed.
► The vehicle may not maintain the set
speed on winding or hilly roads. If this
happens, drive without the cruise control.
To cancel the preset speed, follow any of these methods:
1. Push the CANCEL switch.
2. Tap the brake pedal.
3. Move the selector lever to the N
(Neutral) position.
4. Turn the MAIN switch off. The CRUISE
indicator light will turn off.
► If you depress the brake pedal while
pushing the RESUME/ACCELERATE or
SET/COAST switch and reset at the
cruising speed, the cruise control will
disengage. Turn the MAIN switch off
once and then turn it on again.
► The cruise control will automatically
cancel if the vehicle slows more than
8 MPH (13 km/h) below the set speed.
► If you move the selector lever to N
(Neutral) position, the cruise control
will be canceled.
To reset at a faster cruising speed, use one
of the following methods:
► Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
► Push and hold the RESUME/ACCELERATE
switch. When the vehicle attains
the speed you desire, release the
switch.
► Push, then quickly release the RESUME/
ACCELERATE switch. Each time you do
this, the set speed will increase by
about 1 MPH (1.6 km/h).
To reset at a slower cruising speed, use
one of the following methods:
► Lightly tap the brake pedal. When the
vehicle attains the desired speed, push
the SET/COAST switch and release it.
► Push and hold the SET/COAST switch.
Release the switch when the vehicle
slows down to the desired speed.
► Push, then quickly release the SET/
COAST switch. Each time you do this,
the set speed will decrease by about 1
MPH (1.6 km/h).
To resume the preset speed, push and
release the RESUME/ACCELERATE switch.
The vehicle will resume the last set
cruising speed when the vehicle speed is
over 25 MPH (40 km/h).
See also:
Seat belt maintenance
• To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then, wipe with a cloth and allow the seat belts to dry in the shade.
Do n ...
Lane Departure Warning (LDW) system
Precautions on LDW system
WARNING
► This system is only a warning device to
inform the driver of a potential unintended
lane departure. It will not steer
the vehicle or prevent loss of ...
List of voice commands
When you press and release the
button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.
Rem ...