Selecting vehicle-to-vehicle distance control mode

Selecting vehicle-to-vehicle distance control mode - Intelligent Cruise Control (ICC) system (if so equipped) - Starting and driving - Infiniti QX Owners Manual - Infiniti QX

To choose the vehicle-to-vehicle distance control mode1 , quickly push and release the MAIN switch A .

    See also:

    Changing a flat tire
    If you have a flat tire, follow the instructions below. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on ...

    Cargo area storage bin
    To access the floor storage area, push down 1 to raise the handle, then pull up on the handle to lift the luggage board. ...

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...