4WD shift indicator
The 4WD shift indicator is displayed in the
vehicle information display.
The indicator should turn off within 1
second after placing the ignition switch in
the ON position.
While the engine is running, the 4WD shift
indicator will illuminate the position selected
by the 4WD shift switch. (See the
4WD shift procedure list shown in the
“INFINITI all-mode 4WD® system” earlier in
this section.).
► The 4WD shift indicator may blink while
shifting from one drive mode to the
other. When the shifting is completed,
the 4WD shift indicator will come on. If
the indicator does not come on immediately,
make sure the area around
the vehicle is safe, and drive the
vehicle straight, accelerate or decelerate
or move the vehicle in reverse,
then shift the 4WD shift switch.
► If the 4WD warning light comes on, the
4WD shift indicator turns off.
See also:
To protect your vehicle from corrosion
► Wash and wax your vehicle often to
keep the vehicle clean.
► Always check for minor damage to the
paint and repair it as soon as possible.
► Keep drain holes at the bottom ...
INFINITI Advanced Air Bag System (front seats)
Sedan
1. Crash zone sensor2. Supplemental front air bag modules (INFINITI Advanced Air Bags)3. Front seat-mounted side-impact supplemental air bags4. Occupant classification sensor (pattern sensor) ...
Cleaning
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.
Clean the outside of the windsh ...