SNOW mode

SNOW mode - Starting and driving - Infiniti QX Owners Manual - Infiniti QX

For driving or starting the vehicle on snowy

For driving or starting the vehicle on snowy roads or slippery areas, turn the SNOW mode on. To turn the SNOW mode on, push the SNOW mode switch. The SNOW mode indicator light on the meter panel will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. To turn the SNOW mode off, push the switch and the indicator on the meter panel will turn off. Turn the SNOW mode off for normal driving and fuel economy.

    See also:

    Traction AA, A, B and C
    The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test ...

    Engine block heater (for Canada only)
    Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the outside temperature is 20°F (−78°C) or lower. To use the engine block heat ...

    Locking with key
    Driver’s side The power door lock system allows you to lock or unlock all doors at the same time. Turning the key toward the front 1 of the vehicle locks all doors. Turning the key one time ...