Seat belts
The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely before using them. See “Seat belts” in the “1. Safety — seats, seat belts and supplemental restraint system” section.
WARNING
Do not allow wet seat belts to roll up in the
retractor. NEVER use bleach, dye, or chemical
solvents to clean the seat belts, since
these materials may severely weaken the
seat belt webbing.
See also:
Antifreeze
In the winter when it is anticipated that the
outside temperature will drop below 328F
(08C), check antifreeze to assure proper
winter protection. For additional information,
see “Engine cooli ...
INFINITI Intelligent Key battery discharge
If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure:
1. Place the sh ...
Warning lights
All-Wheel Drive (AWD) warning light (AWD models) (if so equipped)
The warning light comes on when
the ignition switch is pushed to ON. It turns off soon after the engine is started.
If the AWD ...