Drive belts

Drive belts  - Maintenance and do-it-yourself - Infiniti QX Owners Manual - Infiniti QX

1. Power steering fluid pump

1. Power steering fluid pump
2. Water pump
3. Alternator
4. Crankshaft pulley
5. Air conditioner compressor

Be sure the ignition switch is in the OFF or WARNING
Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly.

1. Visually inspect each belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by an INFINITI retailer. 2. Have the belts checked regularly for condition and tension in accordance with the maintenance schedule in your “INFINITI Service and Maintenance Guide”.

    See also:

    The Inside
    Small but well-appointed, the cabin works well for one or two adults; four will find it cramped. The front seats are exceptionally comfortable — and I'm always ready to carp about the slightest se ...

    Care and maintenance
    Use a lightly dampened, lint free cloth to clean the surfaces of your Dual Head Restraint DVD System (DVD player face, screen, remote controller, etc.). CAUTION ● Do not use any solvents or ...

    INFINITI Intelligent Key battery discharge
    If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Place the sh ...