See also:

Activating Alternate Command Mode
When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instrument panel. 2. Highlight the “Others” key. 3. Highli ...

How to use the INFINITI controller
Choose an item on the display by rotating or pushing the center dial 2 upward or downward. Press the ENTER button 1 to select an item. If you press either of the BACK buttons 3 before the o ...

Troubleshooting guide
The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution i ...