Installing top tether strap
Sedan
Coupe
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor cover from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback.
3. Secure the tether strap to the tether anchor point on the rear parcel shelf.
4. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap.
If you have any questions when installing a top tether strap, consult your INFINITI retailer for details.
See also:
Most common factors contributing to vehicle corrosion
► The accumulation of moisture-retaining
dirt and debris in body panel sections,
cavities, and other areas.
► Damage to paint and other protective
coatings caused by gravel and sto ...
Heated steering wheel
The heated steering wheel system is
designed to operate only when the surface
temperature of the steering wheel is below
688F (208C).
Push the heated steering wheel switch to
warm the stee ...
Voice command examples
To use the INFINITI Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands.
As examples, some additional basic oper ...