Console box
Automatic transmission models
Manual transmission models
Coupe — Manual transmission model
To open the console boxes, push the knob A and pull up the lid.
To close, push the lid down until latched.
The inner tray (if so equipped) can be moved to the front or rear position.
Removing the console lid (model with manual transmission)
To remove the console lid: 1. Remove the hinge mask A using a screwdriver wrapped with a cloth.
2. Loosen four screws, and remove the lid.
3. Tighten the two outside screws B .
4. Install the removed hinge mask A to the original position.
See also:
Engine oil and oil filter recommendations
Selecting the correct oil
It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See Capacities and recommended fuel/lubri ...
Sensor maintenance
The sensor for the ICC system A is located below the front bumper.
To keep the ICC system operating properly, be sure to observe the following: . Always keep the sensor clean. Wipe with a soft cl ...
Supplemental air bag warning light
The supplemental air bag warning light, displaying in the instrument
panel, monitors the circuits for the air bag systems, pretensioners and all related wiring.
When the ignition switch is pla ...