Warning signals
To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent Key listed on the following chart or to help prevent the vehicle from being stolen, chime or beep sounds inside and outside the vehicle and a warning displays in the dot matrix liquid crystal display.
When a chime or beep sounds or the warning displays, be sure to check the vehicle and Intelligent Key.
See “Troubleshooting guide” and “Dot matrix liquid crystal display”.
See also:
Liftgate position setting
The liftgate can be set to open to a specific height by performing the following:
1. Open the liftgate using the request switch or the Intelligent Key.
2. Pull the liftgate down to the desired p ...
Tow mode switch
TOW MODE should be used when pulling a
heavy trailer or hauling a heavy load.
Driving the vehicle in TOW MODE with no
trailer/load or light trailer/light load will
not cause any damage. Howe ...
Vehicle recovery (Freeing a stuck vehicle)
WARNING
• Stand clear of a stuck vehicle.• Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damage ...