Cancel or activate seat synchronization function
For Automatic Transmission models: The selector lever must be in the P (Park) position with the ignition switch in the ACC position.
For Manual Transmission models: The parking brake must be applied with the ignition switch in the ACC position.
The seat synchronization function can be activated or canceled by pushing and holding the SET switch for more than 10 seconds while the ignition switch is in the ACC position.
The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indicator lights will blink twice when the function is activated. Note that the indicator lights may illuminate after 5 seconds while holding the SET switch. This indicates readiness for linking the Intelligent Key to a stored memory position. Keep the SET switch pushed for more than 10 seconds to turn on or off the seat synchronization function.
See also:
Windshield deicer (if so equipped)
The windshield deicer switch (rear window
and outside mirror defroster switch) operates
when the ignition switch is in the ON
position.
The deicer is used to remove ice from the
windshield w ...
Connecting procedure
1. Push the PHONE button or the button, and select the “Connect Phone” key.
SAA2520 2. When a PIN code appears on the screen, operate the compatible Bluetooth ® cellular phone to enter the PIN cod ...
Suggested upshift speeds
The following are suggested vehicle speeds for shifting into a higher gear.
These suggestions relate to fuel economy and vehicle performance. Actual upshift speeds will vary according to road conditi ...