Memory storage

Memory storage  - Automatic drive positioner (if so equipped) - Pre-driving checks and adjustments - Infiniti G Owners Manual - Infiniti G

Two positions for the driver’s seat, steering column and outside mirrors can be stored in the automatic drive positioner memory.

Follow these procedures to use the memory system.

1. Automatic transmission models: Move the selector lever to the P (Park) position.

Manual transmission models: Apply the parking brake.

2. Raise the seatback (Coupe).

3. Push the ignition switch to the ON position.

4. Adjust the driver’s seat, steering column and outside mirrors to the desired positions by manually operating each adjusting switch. For additional information, see “Seats” and “Tilt/ telescopic steering” and “Outside mirrors”.

5. Push the SET switch and, within 5 seconds, push the memory switch (1 or 2) fully for at least 1 second.

The indicator light for the pushed memory switch will stay on for approximately 5 seconds after pushing the switch.

If memory is stored in the same memory switch, the previous memory will be deleted.

See also:

Interior
The M35x was beautiful on the inside, too. You can get it with textured aluminum or African rosewood trim. My test car had the rosewood; it was rich-looking and welcoming. The front seats were f ...

INFINITI Drive mode selector
Drive mode select sw Four driving modes can be selected by using the drive mode selector switch, STANDARD, SPORT, ECO and SNOW. NOTE: ● When the drive mode select switch selects a mode, th ...

Tire Pressure Monitoring System (TPMS)
This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK ...