See also:

Activating Standard Mode
When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select th ...

Trip computer
Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the switches as shown above. When the ignition switch is push ...

Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn the engine off and wait more than 15 minutes. 4. Raise and supp ...