Pairing procedure
Pairing procedure
Up to 5 cellular phones can be registered.
1. Push the button on the steering wheel. The system announces the available commands.
2. Speak: “Connect Phone”. The system acknowledges the command and announces the next set of available commands.
3. Speak: “Add Phone”. The system acknowledges the command and asks you to initiate connecting from the phone handset.
INFO:
The Add Phone command is not available when the vehicle is moving.
4. When asked to enter a PIN code to connect a Bluetooth® cellular phone, enter the code “1234”.
The code is always “1234” regardless of the number of phones paired.
The connecting procedure of a cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for more information.
5. The system asks the user to speak a name for the phone.
Speak: “Yes”. The system acknowledges the command and registers the cellular phone.
If the name is too long or too short, the system tells the user, then prompts the user for a name again.
Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells the user, then prompts the user for name again.
See also:
Sonar system (if so equipped)
Sonar system (if so equipped)
WARNING
• The sonar system is a convenience but it is not a substitute for proper parking.Always look around and check that it is safe to do so before parking. Always ...
Jacking up the vehicle and removing the damaged tire
WARNING
• Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands.• Use only the jack provided with your vehicl ...
General maintenance
During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smells, be sure ...