Locking doors

Locking doors  - INFINITI Intelligent Key Operation - INFINITI Intelligent Key System - Pre-driving checks and adjustments - Infiniti JX Owners Manual - Infiniti JX

1. Move the shift selector to the P (Park) position, place the ignition switch in the LOCK position and make sure you carry the Intelligent Key with you.

1. Move the shift selector to the P (Park) position, place the ignition switch in the LOCK position and make sure you carry the Intelligent Key with you.
2. Close all doors.
3. Push any door handle request switch while carrying the Intelligent Key with you.
4. All doors and the rear liftgate will lock.
5. The hazard warning lights flash twice and the outside buzzer sounds once.

NOTE:

NOTE:
● Request switches for all doors and liftgate can be deactivated when the I-Key Door Lock setting is switched to OFF in the Vehicle Settings of the vehicle information display. For additional information, see Vehicle information display in the Instruments and controls section of this manual.
● Doors lock with the door handle request switch while the ignition switch is not in the LOCK position.
● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the mechanical key even if any door is open.
● Doors do not lock with the door handle request switch with the Intelligent Key inside the vehicle and a beep sounds to warn you.

However, when an Intelligent Key is inside the vehicle, doors can be locked with another Intelligent Key.

CAUTION
● After locking the doors using the request switch, make sure that the doors have been securely locked by operating the door handles or the rear liftgate opener switch.
● When locking the doors using the request switch, make sure to have the Intelligent Key in your possession before operating the request switch to prevent the Intelligent Key from being left in the vehicle.
● The request switch is operational only when the Intelligent Key has been detected by the Intelligent Key system.

Lockout protection

To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system.

When the drivers side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.

NOTE:
The doors may not lock when the Intelligent Key is in the same hand that is operating the request switch to lock the door.

Put the Intelligent Key in a purse, pocket or your other hand.

CAUTION
The lockout protection may not function under the following conditions:
● When the Intelligent Key is placed on top of the instrument panel.
● When the Intelligent Key is placed inside the glove box or a storage bin.
● When the Intelligent Key is placed inside the door pockets.
● When the Intelligent Key is placed inside or near metallic materials.

    See also:

    Power liftgate main switch
    The power liftgate operation can be turned on or off by the power liftgate main switch on the instrument panel. When the power liftgate main switch is pushed to the OFF position, the power operat ...

    Cockpit
    1. Instrument brightness control switch (P.2-42) 2. TRIP/RESET switch for twin trip odometer (P.2-7) 3. Headlight, fog light and turn signal switch Headlight (P.2-38) Turn signal ( ...

    Freeing a frozen door lock
    To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system. ...