Selecting the memorized position

Selecting the memorized position - Memory storage function - Automatic drive positioner (if so equipped) - Pre-driving checks and adjustments - Infiniti JX Owners Manual - Infiniti JX

Set the shift selector to the P (Park) position, then:

● Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) or
● Place the ignition switch in the ON position and push the memory switch (1 or 2).

The driver’s seat, steering column, and outside mirrors will move to the memorized position with the indicator light blinking, and then the light will stay on for approximately 5 seconds.

    See also:

    Cleaning
    If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshie ...

    Exterior
    The EX35 was a crowd-pleaser and turned heads as I drove by. I should mention that it was primarily female heads that were turned. That's understandable because the EX35's curvy profile was an att ...

    Off-road recovery
    If the right side or left side wheels may unintentionally leave the road surface. Maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general g ...