Operating tips

Operating tips  - Dual head restraint DVD system (if so equipped) - Monitor, climate, audio, phone and voice recognition systems - Infiniti JX Owners Manual - Infiniti JX

● The images from a device that is connected to the rear auxiliary input jacks cannot be viewed on the front displays.
● It is not possible to switch the source to USB (if so equipped) or DVD using the remote controller when the rear display is in the AUX mode. Push the AUX (L)/ (R) button in the remote controller and turn off the AUX mode, and then push the preferred mode switch.
● It is not possible to display different video files, such as DVD or video files in the USB memory, on the front and rear displays at the same time.
● It is not possible to play an audio file and a video file in the same USB memory at the same time.

Multiple source display

It is possible to play different sources on each display. The following example shows how to operate multiple sources.

1. Display a video file in the front display by selecting the DVD mode.
2. Press the L side on the power ON·OFF button on the remote controller. The left rear display comes on and the DVD screen will be displayed.
3. Press the R side on the power ON·OFF button on the remote controller. The right rear display comes on and the DVD screen will be displayed.
4. Switch the source on the front display to an audio source. The sound from the speakers switches according to the front display. The rear display continues to display the DVD.
5. Turn on a pair of headphones and listen to the DVD on the rear displays using the headphones.
6. Connect an auxiliary device into the AUX jacks and push the AUX (L) or AUX (R) button on the remote controller. The selected side of the rear display turns to the AUX mode. The other rear display continues to display the DVD.
7. Turn on the other pair of headphones. If the sound from the headphones is not from the AUX jacks, switch the channel with the channel select switch on the headphones.

    See also:

    Tire and loading information label
    The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. ...

    How to change the set distance to thevehicle ahead
    The distance to the vehicle ahead can be selected at any time depending on the traffic conditions. Each time the distance switch A is pushed, the set distance will change to long, average, short ...

    Warning lights
    Anti-lock Braking System (ABS) warning light When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates t ...