Intelligent cruise control (ICC) system (Full Speed Range) (if so equipped)

Intelligent cruise control (ICC) system (Full Speed Range) (if so equipped)  - Starting and driving - Infiniti JX Owners Manual - Infiniti JX

The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h).

The vehicle travels at a set speed when the road ahead is clear.

The ICC system can be set to one of two cruise control modes.

● Vehicle-to-vehicle distance control mode:

For maintaining a selected distance between your vehicle and the vehicle in front of you up to the preset speed.
● Conventional (fixed speed) cruise control mode:

For cruising at a preset speed.

WARNING
● Always observe posted speed limits and do not set the speed over them.
● Always drive carefully and attentively when using either cruise control mode.

Read and understand the Owners Manual thoroughly before using the cruise control. To avoid serious injury or death, do not rely on the system to prevent accidents or to control the vehicles speed in emergency situations. Do not use cruise control except in appropriate road and traffic conditions.
● In the conventional (fixed speed) cruise control mode, a warning chime will not sound to warn you if you are too close to the vehicle ahead. Pay special attention to the distance between your vehicle and the vehicle ahead of you or a collision could occur.

1. Vehicle-to-vehicle distance control mode

1. Vehicle-to-vehicle distance control mode
2. Conventional (fixed speed) cruise control mode

Push the CRUISE ON/OFF switch A to choose the cruise control mode between the vehicle-tovehicle distance control mode 1 and the conventional (fixed speed) cruise control mode 2 .

To choose the vehicle-to-vehicle distance control mode 1 , quickly push and release the CRUISE ON/OFF switch A . To choose the conventional (fixed speed) cruise control mode 2 , push and hold the CRUISE ON/OFF switch A for longer than approximately 1.5 seconds.

Once a control mode is activated, it cannot be changed to the other cruise control mode. To change the mode, push the CRUISE ON/OFF switch once to turn the system off. Then push the CRUISE ON/OFF switch again to turn the system back on and select the desired cruise control mode.

Always confirm the setting in the Intelligent Cruise Control system display.

For the vehicle-to-vehicle distance control mode, see the following description. The conventional (fixed speed) cruise control mode, see Conventional (fixed speed) cruise control mode.

See also:

Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with Four-Wheel Drive (4WD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. ...

How to use INFO button
The display screen shows vehicle and navigation information for your convenience. The information shown on the screen should be a guide to determine the condition of the vehicle. See the follo ...

Download Handset Phonebook
Download the contacts registered in a Bluetooth cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies acco ...