Drive belt
1. Drive belt automatic tensioner
2. Alternator
3. A/C compressor
4 Crankshaft pulley
WARNING
Be sure the ignition key is in the OFF or LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by an INFINITI retailer.
2. Have the belt checked regularly for condition and tension in accordance with the maintenance schedule found in your “INFINITI Service and Maintenance Guide”.
See also:
Rear-facing child restraint installation using the seat belts
WARNING
► The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure
to use the ALR mode will result in the
child restr ...
G37 in the Market
Apart from the questionable face-lift — and I'm picking on the most
subjective of bones there — I believe the G37 will succeed into the current
generation's waning years. The 3 Series is the runaw ...
Voice Recognition System
You can also use the Bluetooth® handsfree phone system with Voice Recognition System.
INFO
• The available voice commands are only applicable to the relevant language set in the LANGUAGE setting scr ...