See also:

Confirming memory storage
● Place the ignition switch in the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 seconds. When the memory ...

Changing engine oil and filter
Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn the engine off and wait more than 15 min ...

Engine oil and filter
Two-wheel drive (2WD) models (VQ25HR/VQ37VHR engine) 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug 1 with a wrench and completely drain t ...