Capacities and recommended fuel/lubricants

Capacities and recommended fuel/lubricants  - Technical and consumer information - Infiniti QX Owners Manual - Infiniti QX

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the 8. Maintenance and do-it-yourself section to determine the proper refill capacity.

1: For additional information, see Engine oil in the 8. Maintenance and

1: For additional information, see Engine oil in the 8. Maintenance and do-it-yourself section for changing engine oil.
2: For additional information, see Engine oil and oil filter recommendation later in this section.
3: INFINITI recommends Genuine NISSAN Ester Engine Oil available at INFINITI retailers.
4: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the INFINITI new vehicle limited warranty.
5: Using transfer fluid other than Genuine NISSAN Transfer Fluid will damage the transfer, which is not covered by the INFINITI new vehicle limited warranty.
6: For hot climates, Viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).
7: See an INFINITI retailer for service for synthetic oil.
8: DEXRONTM VI type ATF may also be used.
9: Available in mainland US through an INFINITI retailer.
10: Using Hydraulic Suspension fluid other than Genuine NISSAN Hydraulic Suspension fluid will damage the Hydraulic Suspension, which is not covered by the INFINITI new vehicle limited warranty. See an INFINITI retailer for recommended hydraulic suspension fluid.
11: For additional information, see Vehicle identification later in this section for air conditioner specification label.

See also:

Most common factors contributing to vehicle corrosion
● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coatings caused by gravel and stone ch ...

Entry/exit function
This system is designed so that the drivers seat and automatic operation steering column will automatically move when the shift selector is in the P (Park) position. This allows the driver to get int ...

Opening and closing windows with the mechanical key
The drivers door key operation also allows you to open and close all door windows. To open the windows, turn the drivers door key cylinder to the rear of the vehicle for longer than 1 second ...