Manual operation (if so equipped)
Manual operation (if so equipped)
Tilt or telescopic operation
Pull the lock lever 1 down and adjust the steering wheel up, down, forward or rearward to the desired position.
Push the lock lever up securely to lock the steering wheel in place.
See also:
Engine oil and filter
Two-wheel drive (2WD) models (VQ25HR/VQ37VHR engine)
1. Place a large drain pan under the drain plug.
2. Remove the oil filler cap.
3. Remove the drain plug 1 with a wrench and completely drain t ...
Vehicle Identification Number (VIN) plate
Vehicle Identification Number (VIN) plate
The vehicle identification number plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration. ...
Procedure for storing the outsidemirror positions for best visibility whenbacking up
An outside mirror position for backing up can be stored for each memory switch (1 and 2):
1. Set the parking brake.
2. Place the ignition in the ON position. (Do not start the engine.)
3. Push ...