Selecting the vehicle-to-vehicle distance control mode

Selecting the vehicle-to-vehicle distance control mode - Intelligent Cruise Control (ICC) system (if so equipped) - Starting and driving - Infiniti G Owners Manual - Infiniti G

To choose the vehicle-to-vehicle distance control mode 1 , quickly push and release the MAIN switch A .

Once a control mode is activated, it cannot be changed to the other cruise control mode. To change the mode, push the MAIN switch once to turn the system off. Then push the MAIN switch again to turn the system back on and select the desired cruise control mode.

    See also:

    Heated seats (if so equipped)
    WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact t ...

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

    Engine compartment
    CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipme ...