Vehicle identification
See also:
Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)
2nd row bench seat
First, secure the child restraint with the
LATCH lower anchors (2nd row captain’s or
bench outboard seating positions only) or
the seat belt, as applicable.
1. If ne ...
Forward-facing child restraint installation using the seat belts
WARNING
The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being pro ...
BSW system operation
If the radar sensors detect vehicles in the
detection zone, the BSW/Blind Spot InterventionTM
indicator light located inside the
outside mirrors illuminates. If the turn
signal is then activ ...