See also:

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming: Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release ...

Oil viscosity
The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operat ...

Reprogramming a single HomeLink button
To reprogram a HomeLink Universal Transceiver button, complete the following: 1. Press and hold the desired HomeLink button. DO NOT release the button. 2. The indicator light will begin to fl ...