Audible reminders

Brake pad wear warning
The disc brake pads have audible wear warnings.
When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard.
Key reminder chime
A chime sounds if the driver’s door is opened while the ignition switch is placed in the ACC or OFF position or placed in the OFF or LOCK position with the Intelligent Key left in the Intelligent Key port. Make sure the ignition switch is placed in the LOCK position, and take the Intelligent Key with you when leaving the vehicle.
Lane departure warning chime (if so equipped)
Lane Departure Prevention (LDP) system is on, the chime sounds if the vehicle is traveling close to either the left or the right of a traveling lane with detectable lane markers.
See “Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system” in the “Starting and driving” section for more details.
Light reminder chime
With the ignition switch placed in the OFF position, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.
Turn the headlight control switch off before leaving the vehicle.
Intelligent Key door buzzer
The Intelligent Key door buzzer sounds if any one of the following improper operations is found.
● The ignition switch is not returned to the LOCK position when locking the doors.
● The Intelligent Key is left inside the vehicle when locking the doors.
● The Intelligent Key is taken outside the vehicle when operating the vehicle.
● Any doors are not closed securely when locking the doors.
When the buzzer sounds, be sure to check both the vehicle and the Intelligent Key System. See “INFINITI Intelligent Key” in the “Pre-driving checks and adjustments” section.
See also:
Important information about this manual
You will see various symbols in this manual. They are used in the following ways:
WARNING
This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoi ...
Trip computer
Trip computer
Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side or front of the switches as shown above.
Wh ...
Around View™ Monitor settings
To set up the Around View Monitor to your preferred settings, press the SETTING button, select the “Camera” key and press the ENTER button.
Predictive Course Lines:
When this item is turned to ON, ...
