Hazard warning flasher switch

Hazard warning flasher switch - Instruments and controls - Infiniti JX Owners Manual - Infiniti JX

Push the switch on to warn other drivers when you must stop or park under emergency conditions.

Push the switch on to warn other drivers when you must stop or park under emergency conditions.

All turn signal lights flash.

WARNING
● If stopping for an emergency, be sure to move the vehicle well off the road.
● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.
● Turn signals do not work when the hazard warning flasher lights are on.

The flashers will operate with the ignition switch placed in any position.

Some state laws may prohibit the use of the hazard warning flasher switch while driving.

    See also:

    Difference between predicted and actual distances
    Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display ...

    Reprogramming a single HomeLink button
    To reprogram a HomeLink Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink button. Do not release the button until step 4 has been completed. 2. When t ...

    BCI system operation
    ● When the radar sensors may not be able to detect certain objects such as: – Pedestrians, bicycles, animals – A vehicle that passing at speeds greater than approximately 15 MPH (24 km/h ...