Heated steering wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below approximately 68°F (20°C).
Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on.
If the surface temperature of the steering wheel is below 68°F (20°C), the system will heat the steering wheel to approximately 86°F (30°C), then turn off automatically.
Push the switch again to turn the heated steering wheel off manually. The indicator light will go off.
NOTE:
The heated steering wheel switch is equipped with a 30 minute timer. After the switch has been activate for 30 minutes, the system will automatically turn off. If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction.
See also:
Ventilators
Center ventilators
Open/close the ventilators by moving the
control to either direction.
: This symbol indicates that the
ventilators are
closed. Moving the side control to this
direct ...
Programming trouble-diagnosis
If HomeLink® does not quickly learn the hand-held transmitter information: . replace the hand-held transmitter batteries with new batteries.
• position the hand-held transmitter with its battery area ...
Canceling a remote start
To cancel a remote start, perform one of the following:
● Aim the Intelligent Key at the vehicle and press and hold until the parking
lights turn off.
● Turn on the hazard warning ...