Unlocking doors

Unlocking doors  - INFINITI Intelligent Key Operation - INFINITI Intelligent Key System - Pre-driving checks and adjustments - Infiniti JX Owners Manual - Infiniti JX

1. Carry the Intelligent Key.

1. Carry the Intelligent Key.
2. Push the door handle request switch.
3. The hazard warning lights flash once and the outside buzzer sounds once.
4. Push the door handle request switch again within 1 minute to unlock all doors.

For power liftgate opening:
1. Carry the Intelligent Key.
2. Press the power liftgate request switch.

NOTE:

NOTE:
Request switches for all doors and liftgate can be deactivated when the I-Key Door Lock setting is switched to OFF in the Vehicle Settings of the vehicle information display. For additional information, see Vehicle information display in the Instruments and controls section of this manual.

If a door handle is pulled while unlocking the doors, that door may not be unlocked. Returning the door handle to its original position will unlock the door. If the door does not unlock after returning the door handle, push the door handle request switch to unlock the door.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch.

● Opening any door.
● Pushing the ignition switch.

The interior light timer illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position.

The interior light can be turned off without waiting by performing one of the following operations.

● Placing the ignition switch in the ON position.
● Locking the doors with the remote controller.
● Switching the room light switch to the OFF position.
● Switching the Auto Room Lamp to the OFF position in Vehicle Settings of the vehicle information display. See Vehicle information display in the Instruments and controls section.

    See also:

    Automatic drive positioner
    SET/memory switches The automatic drive positioner system has three features: ► Entry/exit function► Memory storage► Setting memory function ...

    If your vehicle is stolen
    If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink . Consult the Owners Manual of each device or call the manufacturer or dea ...

    Break-in schedule
    CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to foll ...