Canceling a remote start

To cancel a remote start, perform one of the following:
● Aim the Intelligent Key at the vehicle and press and hold
until the parking
lights turn off.
● Turn on the hazard warning flashers.
● Cycle the ignition switch ON and then OFF.
See also:
RearView monitor (if so equipped)
When the selector/shift lever is shifted into the “R” (Reverse) position, the monitor display shows view to the rear of the vehicle.
The system is designed as an aid to the driver in detecting large ...
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on
the vehicle body underside can accelerate
corrosion. Wet floor coverings will not dry
completely inside the vehicle, and should
be removed for ...
Entering from the side
The Blind spot warning indicator light illuminates if a vehicle enters the detection zone from either side.
NOTE:
The radar sensors may not detect a vehicle which is traveling at about the same sp ...
