OFF button

To change the display brightness, press the
OFF
button. Press the button again to change the display to the day
or the night
display. The brightness can then be adjusted using the INFINITI controller.
If no operation is performed within 5 seconds, the display will return to the previous display.
Press and hold the
OFF button for more than two seconds to turn the display off. Press the button again to turn the display on.
See also:
Intelligent Key system
WARNING
• Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use.• ...
Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires ...
After the operation
1. Install the engine undercover into position as the following steps.
a. Pull the center of the small plastic clip out.
b. Hold the engine undercover into position.
c. Insert the clip through the ...
