Passenger compartment

Passenger compartment - Fuses - Maintenance and do-it-yourself - Infiniti JX Owners Manual - Infiniti JX

CAUTION

CAUTION
Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire.

If any electrical equipment does not operate, check for an open fuse.

1. Be sure the ignition switch and the headlight switch are OFF.
2. Open the glove box to access the fuse box cover.
3. Pull the fuse box cover to remove.
4. Remove the fuse with the fuse puller.

5. If the fuse is open A , replace it with an equivalent good fuse B .

5. If the fuse is open A , replace it with an equivalent good fuse B .
6. Push the fuse box cover to install.
7. If a new fuse also opens, have the electrical system checked and repaired by an INFINITI retailer.

Extended storage switch

Extended storage switch

If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse.

If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse.

NOTE:
The extended storage switch is used for long term vehicle storage. Even if the extended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse.

How to replace the extended storage switch:

1. To remove the extended storage switch, be sure the ignition switch is in the OFF or LOCK position.
2. Be sure the headlight switch is in the OFF position.
3. Remove the fuse box cover.
4. Pinch the locking tabs 1 found on each side of the storage switch.
5. Pull the storage switch straight out from the fuse box

    See also:

    Bluetooth® streaming audio
    Your INFINITI is equipped with Bluetooth® Streaming Audio. If you have a compatible Bluetooth® device with streaming audio (A2DP profile), you can set up the wireless connection between your B ...

    Engine block heater (for Canada only)
    Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the outside temperature is 20°F (−78°C) or lower. To use the engine block heat ...

    Intelligent Key operating range
    The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 1 . When the Intelligent Key battery is discharged o ...