Bluetooth® Hands-Free Phone System
WARNING
► Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
► If you find yourself unable to devote full
attention to vehicle operation while
talking on the phone, pull off the road
to a safe location and stop your vehicle
before doing so.
CAUTION
To avoid draining the vehicle battery, use a
phone after starting the engine.
Your INFINITI is equipped with Bluetooth®
Hands-Free Phone System. If you are an
owner of a compatible Bluetooth® enabled
cellular phone, you can set up the wireless
connection between your cellular phone
and the in-vehicle phone module. With
Bluetooth® wireless technology, you can
make or receive a telephone call with your
cellular phone in your pocket.
Once a cellular phone is connected to the
in-vehicle phone module, no phone connecting
procedure is required anymore.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is pushed to the ON
position with the registered cellular phone
turned on and carried in the vehicle.
You can register up to 5 different Bluetooth
® cellular phones in the in-vehicle
phone module. However, you can talk on
only one cellular phone at a time.
The INFINITI Voice Recognition system
supports the phone commands, so dialing
a phone number using your voice is
possible. For more details, see “INFINITI
Voice Recognition system” later in this
section; page 4-104.
Before using the Bluetooth® Hands-Free
Phone System, refer to the following notes.
► Wireless LAN (Wi-Fi) and the Bluetooth®
functions share the same frequency
band (2.4 GHz). Using the Bluetooth®
and the wireless LAN functions at the
same time may slow down or disconnect
the communication and cause
undesired noise. It is recommended
that you turn off the wireless LAN (Wi-
Fi) when using the Bluetooth® functions.
► Set up the wireless connection between
a compatible cellular phone and the invehicle
phone module before using the
Bluetooth® Hands-Free Phone System.
► Some Bluetooth® enabled cellular
phones may not be recognized by the
in-vehicle phone module. Please visit
www.InfinitiUSA.com/bluetooth for a
recommended phone list.
► You will not be able to use a hands-free
phone under the following conditions:
— Your vehicle is outside of the telephone
service area.
— Your vehicle is in an area where it is
difficult to receive radio waves; such
as in a tunnel, in an underground
parking garage, behind a tall building
or in a mountainous area.
— Your cellular phone is locked in
order not to be dialed.
► When the radio wave condition is not
ideal or ambient sound is too loud, it
may be difficult to hear the other
person’s voice during a call.
► Immediately after the ignition switch is
pushed to the ON position, it may be
impossible to receive a call for a short
period of time.
► Do not place the cellular phone in an
area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.
► While a cellular phone is connected
through the Bluetooth® wireless connection,
the battery power of the
cellular phone may discharge quicker
than usual.
► If the Bluetooth® Hands-Free Phone
System seems to be malfunctioning,
please visit www.InfinitiUSA.com/bluetooth
for troubleshooting help.
► Some cellular phones or other devices
may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a
different location may reduce or eliminate
the noise.
► Refer to the cellular phone Owner’s
Manual regarding the telephone pairing
procedure specific to your phone,
battery charging, cellular phone antenna,
etc.
► The antenna display on the monitor will
not coincide with the antenna display
of some cellular phones.
► Keep the interior of the vehicle as quiet
as possible to hear the caller’s voice
clearly as well as to minimize its
echoes.
► If reception between callers is unclear,
adjusting the incoming or outgoing call
volume may improve the clarity.
See also:
Cockpit
1. Instrument brightness control switch
(P.2-42)
2. TRIP/RESET switch for twin trip odometer
(P.2-7)
3. Headlight, fog light and turn signal
switch
— Headlight (P.2-38)
— Turn signal ( ...
Preview function (Intelligent Cruise Control system equipped models)
When the Preview Function identifies the
need to apply emergency braking by
sensing a vehicle ahead in the same lane
and the distance and relative speed from
it, it applies the brake pre-press ...
Automatic climate control (Type C)
1. “AUTO” automatic operation button/Temperature control dial (driver side)2. “A/C” air conditioner ON/OFF button3. “” fan speed increase button4. “” front defroster button5. “MODE” manual air flow ...