Checking bulbs
With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine. The following lights will come on (if so equipped):
The following lights come on briefly and then go off (if so equipped):
If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system checked by an INFINITI retailer. Some indicators and warnings are also displayed on the dot matrix liquid crystal display between the speedometer and tachometer. (See “Dot matrix liquid crystal display” later in this section.)
See also:
Temperature A, B and C
The temperature grades A (the highest), B,
and C, representing the tire’s resistance to
the generation of heat and its ability to
dissipate heat when tested under controlled
conditions on a sp ...
Power steering fluid
Power steering fluid
Check the fluid level in the reservoir.
The fluid level should be checked using the HOT range (*1 : HOT MAX., 2 : HOT MIN.) at fluid temperatures of 122 to 1768F (50 to 808C) ...
Front seats
Front power seat adjustment
Operating tips:
• The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch.
• ...