Locking with mechanical key
The power door lock system allows you to
lock or unlock all doors simultaneously
using the mechanical key.
► Turning the driver’s door key cylinder to
the front of the vehicle 1 will lock all
doors.
► Turning the driver’s door key cylinder
once to the rear of the vehicle 2 will
unlock the driver’s door. After returning
the key to the neutral position 3 ,
turning it to the rear again within 5
seconds will unlock all doors.
► You can switch the lock system to the
mode that allows you to open all the
doors when the key is turned once.
(See “How to use SETTING button” in
the “4. Monitor, climate, audio, phone
and voice recognition systems” section.)
See also:
Engine compartment
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipme ...
Operating range for engine start function
Operating range for engine start function
The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the specified operating range
1 .
When the Intelligent K ...
BSW system operation
If the radar sensors detect vehicles in the
detection zone, the BSW/Blind Spot InterventionTM
indicator light located inside the
outside mirrors illuminates. If the turn
signal is then activ ...