Inside mirror
Adjust the height and the angle of the inside mirror to the desired position.
Automatic anti-glare type
The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the indicator light A will illuminate and excessive glare from the headlights of the vehicle behind you will be reduced. Push the “” switch B to make the inside rearview mirror operate normally. The indicator light will turn off. Push the “I” switch C to turn the system on. Do not allow any object to cover the sensors D or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. For the HomeLink® Universal Transceiver operation, see “HomeLink® Universal Transceiver” in the “2. Instruments and controls” section.
See also:
Cleaning
If your windshield is not clear after using
the windshield washer or if a wiper blade
chatters when running, wax or other
material may be on the blade or windshield.
Clean the outside of the w ...
Ventilators
Center ventilators
Open/close the ventilators by moving the
control to either direction.
: This symbol indicates that the
ventilators are
closed. Moving the side control to this
direct ...
Checking engine oil level
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn off the engine. Wait more than 15
minutes for the oil ...