Safety note

WARNING
► Do not disassemble or modify this
system. If you do, it may result in
accidents, fire, or electric shock.
► Do not use this system if you notice any
abnormality, such as a frozen screen or
lack of sound. Continued use of the
system may result in accident, fire or
electric shock.
► In case you notice any foreign object in
the system hardware, spill liquid on it,
or notice smoke or smell coming from it,
stop using the system immediately and
contact your nearest INFINITI retailer.
Ignoring such conditions may lead to
accidents, fire, or electric shock.
► Park the vehicle in a safe location and
apply the parking brake to view the
images on the front center display
screen using devices connected to the
auxiliary input jacks.
► Positioning the heating or air conditioning
controls and display controls should
not be done while driving so that full
attention may be given to driving operation.
Do not attempt to operate the system in extreme temperature conditions [below −4F (−20C) and above 158F (70C)]. Operating this system under these conditions may result in system malfunctions.
See also:
Radar maintenance
The two radar sensors for the BSW, BSI and BCI systems are located near the rear bumper. Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient con ...
BSW system operation
If the radar sensors detect vehicles in the detection zone, the Blind spot warning indicator light located inside the outside mirrors illuminates. If the turn signal is then activated, the system ch ...
Defrosting outside mirrors (if so equipped)
The outside mirrors will be heated when the rear window defroster switch is operated. ...
