See also:

If your vehicle overheats
CAUTION ► Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. ► To avoid the danger of being scalded, never remove the rad ...

Readiness for Inspection/Maintenance (I/M) test (US only)
A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. Make sure ...

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming: Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release ...