Distance Control Assist (DCA) system (if so equipped)
The Distance Control Assist (DCA) system brakes and moves the accelerator pedal upward according to the distance from and the relative speed of the vehicle ahead to help assist the driver to maintain a following distance.
WARNING
► Always drive carefully and attentively
when using the Distance Control Assist
system. Read and understand the Owner’s
Manual thoroughly before using the
DCA system. To avoid serious injury or
death, do not rely on the system to
prevent accidents or to control the
vehicle’s speed in emergency situations.
Do not use the Distance Control Assist
system except in appropriate road and
traffic conditions.
► If the vehicle ahead comes to a stop, the
vehicle decelerates to a standstill within
the limitations of the system. The
system will cancel once it judges that
the vehicle has come to a standstill with
a warning chime. To prevent the vehicle
from moving, the driver must depress
the brake pedal.
► The DCA system will not apply brake
control while the driver’s foot is on the
accelerator pedal.
See also:
Reprogramming a single HomeLink button
To reprogram a HomeLink Universal Transceiver button, complete the following:
1. Press and hold the desired HomeLink button.
DO NOT release the button.
2. The indicator light will begin to fl ...
If your vehicle is stolen
If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink . Consult the Owner’s Manual of each device or call the manufacturer or dea ...
Steering-wheel-mounted controls for audio
1. Audio source switch2. Menu control switch (models with navigation system) or audio tuning switch (models without navigation system)3. Volume control switch4. Back switch ...