Adjusting outside mirrors

The outside mirror control switch is located on the armrest.
The outside mirror will operate only when the ignition switch is in the ACC or ON position.
Turn the switch right or left to select the right or left side mirror 1 , then adjust using the control switch 2 .
See also:
Procedure for storing the outsidemirror positions for best visibility whenbacking up
An outside mirror position for backing up can be stored for each memory switch (1 and 2):
1. Set the parking brake.
2. Place the ignition in the ON position. (Do not start the engine.)
3. Push ...
Radar maintenance
The two radar sensors for the BSW, BSI and BCI systems are located near the rear bumper. Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient con ...
How to use the INFINITI controller
Choose an item on the display by rotating or pushing the center dial 2 upward or downward.
Press the ENTER button 1 to select an item.
If you press either of the BACK
buttons 3 before the o ...
