Giving voice commands
Giving voice commands
1. Push the TALK switch located on the steering wheel.
2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?”.
3. After the tone sounds and the icon on the screen changes from to , speak a command.
Selecting the “Practice” key will start the practice mode. See “Let’s Practice”.
4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is completed.
Selecting the “Help” key can display the detailed information of the each command.
Operating tips:
• Say a command after the tone.
• Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the system.
• If the command is not recognized, the system announces, “Please say again”.
Repeat the command in a clear voice.
• Push the BACK button once to return to the previous screen.
• To exit the voice recognition system, push and hold the TALK switch. The message, “Voice canceled” will be announced.
• To skip the voice guidance function and give the command immediately, press the TALK switch to interrupt the system. Remember to speak after the tone.
• If you want to adjust the volume of the system feedback, push the volume control buttons [+] or [−] on the steering switch or use the audio system volume knob while the system is making an announcement.
How to speak numbers:
INFINITI Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.
General rule
Only single digits 0 (zero) to 9 can be used.
(For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.)
Examples
• 1-800-662-6200 — “One eight zero zero six six two six two zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone numbers by saying the phone number in three groups of numbers. For example, when you try to call 800-662-6200, say “eight zero zero” first, and the system will then ask you for the next three digits. Then, say “six six two”. After recognition, the system will then ask for the last four digits.
Say, “six two zero zero”. Using this method of phone digit entry can improve recognition performance.
When speaking a house number, speak the number “0” as “zero”. If the letter “o (oh)” is included in the house number, it will not be recognized as the number “0 (zero)” even if you speak “oh” instead of “zero”.
Please speak “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)”
Send digits using dial tone:
• Press the TALK switch during a phone call.
• The menu will be launched and you will be provided with the following guidance: "Please say the digits to dial".
• After guidance, say the digits of the number you want to send. After this, the digits that have been recognized will be read out.
• If you press the ENTER button on the steering wheel or on the INFINITI controller, the selected digits will be sent.
See also:
Cockpit
1. Instrument brightness control switch
(P.2-42)
2. TRIP/RESET switch for twin trip odometer
(P.2-7)
3. Headlight, fog light and turn signal
switch
— Headlight (P.2-38)
— Turn signal ( ...
Lower Anchors and Tethers for CHildren System (LATCH)
LATCH system lower anchor locations -
captain’s seats
LATCH system lower anchor locations -
bench seat
Your vehicle is equipped with special
anchor points that are used with the LATC ...
Exterior
The EX35 was a crowd-pleaser and turned heads as I drove by. I should mention
that it was primarily female heads that were turned. That's understandable
because the EX35's curvy profile was an att ...