Conventional (fixed speed) cruise control mode display and indicators


Conventional (fixed speed) cruise control mode display and indicators
The display is located between the speedometer and tachometer.
1. MAIN switch indicator: Indicates that the MAIN switch is ON.
2. Cruise set switch indicator: Displays while the vehicle speed is controlled by the conventional (fixed speed) cruise control mode of the ICC system.
3. Cruise system warning light: Comes on if there is a malfunction in the cruise control system.
See also:
Passenger compartment
CAUTION
Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire.
If any electrical equipment does not ...
Antifreeze
In the winter when it is anticipated that the
outside temperature will drop below 328F
(08C), check antifreeze to assure proper
winter protection. For additional information,
see “Engine cooli ...
Brake fluid
For further brake fluid specification information,
see “Capacities and recommended
fuel/lubricants” in the “9. Technical and
consumer information” section of this
manual.
WARNING
► U ...
