See also:

Linking a keyfob to a stored memoryposition
Each keyfob can be linked to a stored memory position (memory switch 1 or 2) with the following procedure. 1. Follow the steps for storing a memory position. 2. While the indicator light for the ...

Procedure for storing the outsidemirror positions for best visibility whenbacking up
An outside mirror position for backing up can be stored for each memory switch (1 and 2): 1. Set the parking brake. 2. Place the ignition in the ON position. (Do not start the engine.) 3. Push ...

Environmental factors influence the rate of corrosion
Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle and should be removed for dryin ...