OFF button
To change the display brightness, press the OFF button. Pressing the button
again will change the display to the day
or the night
display. The brightness can
then be adjusted using the INFINITI controller.
The display brightness can also be adjusted using the + (brighter) button or the (dimmer) button.
If no operation is done within 10 seconds, the display will return to the previous display.
Press and hold the OFF button for
more than 2 seconds to turn the display off. Press the button again to turn the display on.
See also:
Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake.
2. Run the engine until it reaches operating temperature.
3. Turn the engine off and wait more than 15 minutes.
4. Raise and supp ...
Precautions on cruise control
• If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the dot matrix crystal display will then blink to warn the driver.
• If the engine coolant temperature ...
Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming:
Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release ...